5.13
PRINTING TASKS
Setting Graphic Properties
Use this option to lighten or darken the image appearance
of your print jobs.
• Normal – This setting is for normal documents.
• Light – This setting is for bolder line widths or darker
grayscale images.
• Dark – This setting is for finer line width, higher definition
in graphics, and lighter grayscale images.
Darkness
To conserve power when a printer is idle, the printer
enters a reduced power state after completing a print job,
according to a time specified by you in the Power Save
Mode box.
Select the length of time you want from the drop-down
list.
If your printer is constantly used, select OFF to keep the
printer ready to print with the minimum warm-up time.
This uses more energy to keep the printer warm and
ready to print.
Power Save
Mode
You can select the printing resolution by choosing either
300 dpi or 600 dpi. The higher the setting, the sharper the
clarity of printed characters and graphics. Higher settings
may increase the time it takes to print a document.
Resolution
With this option checked, you can optimize the print
quality for a low pressure area, such as a high ground.
Altitude
Correction
To Next Page
Loading...
