5.16
PRINTING TASKS
4
If you created a new watermark or edited an existing
one, the Add and Update buttons are enabled.
To add a new watermark to the list, click Add.
5
If you want to edit a watermark, select the watermark
you want from the list, edit and then click Update.
6
When you’re finished editing, click OK, and then start
printing.
To stop printing the watermark, select None in the
Message drop-down list.
1
To change the print settings from your software
application, access the printer properties. See page
5.3 to access the printer properties.
2
From the Watermark tab, select the watermark you
want to delete in the Messages drop-down list.
3
Click Delete.
4
Click OK.
To delete a
watermark
Printing Watermarks
To Next Page
Loading...
