17
Attach cables
Step 5: Attach cables
Local printing To attach a Lexmark E320 or E322
printer to a computer using an IEEE-
1284 compliant parallel cable, we
recommend using Lexmark part number
1329605 (10 ft) or 1427498 (20 ft).
1 Make sure the printer, computer,
and any attached peripherals are
turned off and unplugged.
2 Plug one end of the cable into the
parallel connector on the printer.
3 Snap down the clips at each end
of the connector.
4 Plug the other end of the parallel
cable into the connector on the
computer.
To Next Page
Loading...
