26
Load paper
— Have postage stamps attached
— Have any exposed adhesive
when the flap is in the sealed
position
5 Slide the paper guides flush
against the edges of the paper or
envelope.
6 Select the paper size and type
from your software application.
7 Start your print job.
8 Briefly (approximately one
second) push the operator panel
button to start printing.
9 When the Load Paper light and
the Press Button light come on,
place another piece of media in
the manual feed.
10 Press the operator panel button to
print another page.
What do I do next?
Task Go to page ...
Install optional tray 2 15
Attach cables 17
To Next Page
Loading...
