Notes:
• Place the printer near the computer during setup. If you are setting up on a wireless network, then you may
move the printer after setup is complete.
• Do not attach the USB cable until prompted to do so.
• Contents may vary by model and region.
2 To initiate printer setup using a computer, insert the installation software CD, or download the printer driver.
With a CD or DVD drive (Windows/Macintosh): Without a CD or DVD drive or for Linux:
Note: If the Welcome screen does not appear after a minute, then see
“Welcome screen did not appear during installation” on page 74.
Download the printer driver from
www.lexmark.com.
3 Remove tape and packing material from all areas of the printer.
About your printer
10
To Next Page
Loading...
