Lexmark GENESIS S815 - Scanning to a flash drive or memory card

2 Navigate to:
Scan > Scan to: Destination > Scan to Computer
3 Touch USB-Connected Computer or the name of a network computer.
The local or network computer is the destination that will receive the scan.
Notes:
• If the printer is connected only to a local computer, then the printer will automatically set the local computer
as the default destination to receive the scan.
• For Macintosh users, if you want to scan from a network computer, then you must first add the printer to the
Edit Device List dialog. For more information, click Library > Printers > Lexmark > Utilities, open Edit Device
List, and then click
?
.
• You may be prompted to enter a PIN if the computer requires it.
• To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4 Select the output file type you want to create, and then touch Accept.
5 Touch More Options to select the color, resolution quality, and the original image size. If necessary, touch
Accept each time you make a selection.
6 Press .
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write-protected.
1 Load the original document.
The Instant Preview screen appears.
2 Navigate to:
Scan > Scan to: Destination
3 Insert the flash drive or memory card.
Notes:
• The printer reads only one memory device at a time.
• If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears on
the display prompting you to select which memory device to use.
4 Select the output file type you want to create.
Note: Select the Multiple PDF file type if you want to scan multiple pages and save them as one file.
5 Touch More Options to select the color, resolution quality, and original image size. If necessary, touch Accept each
time you make a selection.
6 Press .
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning
60