Lexmark J110 - Page 417

Index
X-5
PCL emulation (continued)
commands (continued)
font creation (continued)
font ID 2-36
load character 2-36
font selection
height (primary) 2-33
height (secondary) 2-33
pitch (primary) 2-33
pitch (secondary) 2-33
primary and secondary pitch 2-35
select default font (primary) 2-34
select default font (secondary) 2-34
select download font (primary) 2-34
select download font (secondary) 2-34
spacing (primary) 2-33
spacing (secondary) 2-33
stroke weight (primary) 2-34
stroke weight (secondary) 2-34
style (primary) 2-33
style (secondary) 2-33
symbol set (primary) 2-33
symbol set (secondary) 2-33
text parsing method 2-35
transparent print data 2-34
typeface selection (primary) 2-34
typeface selection (secondary) 2-34
underline disable 2-34
underline enable 2-34
job control
job separation 2-28
long-edge offset registration 2-25
number of collated copies 2-25
number of copies 2-25
output bin 2-29
printer reset 2-25
short-edge offset registration 2-25
simplex/duplex print 2-25
unit of measure 2-26
Universal Exit Language 2-26
macros
macro control 2-36
macro ID 2-36
miscellaneous commands
display functions off 2-47
display functions on 2-46
end-of-line wrap 2-46
paper type 2-47
PCL emulation (continued)
commands (continued)
miscellaneous commands (continued)
print quality 2-47
printtestpage2-47
page control
character text path 2-28
clear horizontal margins 2-28
duplex page side selection 2-30
horizontal motion index 2-29
left margin 2-28
line spacing (alternative method) 2-30
page orientation 2-28
page size 2-27
paper source 2-27
print direction 2-28
right margin 2-28
set page length 2-30
set universal custom name 2-28
set universal feed direction 2-28
set universal height 2-27
set universal width 2-27
skip perforation 2-29
text length 2-29
text scale mode 2-30
top margin 2-28
vertical motion index 2-29
picture frame
enter GL/2 language 2-46
enter PCL emulation 2-46
GL/2 plot horizontal size 2-46
GL/2 plot vertical size 2-46
picture frame horizontal size 2-46
picture frame vertical size 2-46
set picture frame anchor point 2-46
print model
area fill ID 2-37
logical operation 2-37
pattern control 2-38
pattern transparency mode 2-37
pixel placement 2-37
select current pattern 2-37
set pattern reference point 2-38
source transparency mode 2-37
user-defined pattern 2-38
raster graphics
destination raster height 2-42
destination raster width 2-41