Lexmark J110 - Page 418

Index
X-6
PCL emulation (continued)
commands (continued)
raster graphics (continued)
end raster graphics (version B) 2-41
end raster graphics (version C) 2-41
raster graphics presentation 2-40
raster resolution 2-40
set raster compression mode 2-41
set raster configuration 2-42
source raster height 2-40
source raster width 2-40
start raster graphics 2-40
transfer raster data by plane 2-40
transfer raster data by row/block 2-41
Y offset 2-40
rectangular area fill graphics
area fill ID 2-39
fill rectangular area 2-39
horizontal rectangle size 2-38
vertical rectangle size (decipoints)
2-38
vertical rectangle size (PCL Units) 2-38
status readback
echo 2-45
flush all pages 2-45
free space 2-45
inquire status readback entity 2-45
set status readback location type 2-45
set status readback location unit 2-45
user-defined symbol set
define symbol set 2-35
symbol set control 2-35
symbol set ID code 2-35
control codes 2-22
font and symbol set support
Lexmark C720 2-10
Lexmark J110 2-20
Lexmark T520 2-10
Lexmark T522 2-10
Lexmark T620 2-10
Lexmark T622 2-10
Lexmark W820 2-10
GL/2 Language 2-47
linking commands 2-23
paper and envelope dimensions
Lexmark C720 2-4
Lexmark J110 2-5
Lexmark T family 2-6
PCL emulation (continued)
paper and envelope dimensions (continued)
Lexmark W820 2-7
password protection 3-92
saving files on flash memory or disk 6-3
selecting
MarkVision Professional 2-1
operator panel 2-1
SmartSwitch 2-1
software application 2-2
SmartSwitch 2-1
standard fonts 2-11
Type 1 fonts 2-14
variables, PJL
common 3-47
printer unique 3-48
physical page
PCL emulation 2-2
PostScript emulation 4-3
physical page border 2-8
physical specifications 7-4
ports, communication 8-2
OS/2 8-5
Windows 2000 8-4
Windows 95/98/Me 8-2
Windows NT 4.0 8-3
PostScript emulation
accessing files 6-9
command format 4-10
device names 6-9
device parameters 4-80
device search order 6-12
envelope size support 4-19
filenames 6-9
fonts
Lexmark C720 4-7
interpreter parameters 4-71
page device parameters 4-58
page formatting 4-3
paper size commands
currentuniversalsize 4-13
ignoresize 4-13
setignoresize 4-13
setuniversalsize 4-14
paper sizes supported 4-11
paper tray commands
manualfeed 4-17
papertray 4-17