Lexmark M3150dn - User Manual

Questions and Answers:

A
Amy LeeAug 28, 2025
How to fix incorrect paper size error on Lexmark Printer [34]?
- P
  Peter PetersAug 28, 2025
  To resolve the incorrect paper size error on your Lexmark printer, try these steps: * Load the correct size of paper in the tray. * From the printer control panel, press to clear the message and print using a different tray. * Check the tray length and width guides to ensure the paper is loaded properly. * Make sure the correct paper size and type are specified in Print Properties or the Print dialog. * Verify that the paper size and type settings are specified in the Paper menu on the printer control panel. * Ensure the paper size is correctly set. * If all else fails, cancel the print job.
W
william83Sep 18, 2025
What does 'Error reading USB hub. Remove hub.' mean on Lexmark M3150dn Printer?
- L
  Leah BrownSep 18, 2025
  If your Lexmark printer displays 'Error reading USB hub. Remove hub.', it means an unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
S
Savannah TuckerAug 29, 2025
How to resolve 'Load [paper source] with [custom string] [orientation]' on Lexmark M3150dn Printer?
- L
  Leslie RoblesAug 29, 2025
  To resolve the 'Load [paper source] with [custom string] [orientation]' message on your Lexmark printer: * Load the indicated tray or feeder with the correct size and type of paper. * Alternatively, cancel the current job.
C
Carol MeltonAug 29, 2025
How to resolve 'Load Manual Feeder with [custom string] [orientation]' on Lexmark M3150dn?
- A
  Andrea HarveyAug 29, 2025
  To resolve the 'Load Manual Feeder with [custom string] [orientation]' message on your Lexmark printer: * Load the feeder with the correct size and type of paper. * From the printer control panel, press to clear the message and continue printing.
P
Peter SmithAug 30, 2025
How to resolve 'Change [paper source] to [custom type name] load [orientation]' on Lexmark M3150dn?
- E
  eherreraAug 30, 2025
  To resolve the 'Change [paper source] to [custom type name] load [orientation]' message on your Lexmark printer: * Load the correct size and type of paper in the tray, and then press on the printer control panel. * Alternatively, cancel the print job.
J
Julia TerrySep 23, 2025
What does 'Weblink server not set up. Contact system administrator.' mean on Lexmark Printer?
- A
  Andrea Brennan DDSSep 23, 2025
  If your Lexmark printer displays 'Weblink server not set up. Contact system administrator.', from the printer control panel, press to clear the message.
T
Todd LeeSep 16, 2025
What does 'Too many trays attached [58]' mean on Lexmark Printer?
- V
  vbaileySep 16, 2025
  If your Lexmark printer displays 'Too many trays attached [58]', follow these steps: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the extra trays. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on.
A
Adriana DrakeSep 12, 2025
What does 'Network [x] software error [54]' mean on Lexmark Printer?
- D
  David MooreSep 13, 2025
  To resolve the 'Network [x] software error [54]' on your Lexmark printer, try these steps: * From the printer control panel, press to clear the message and continue printing. * Unplug the router, then wait for 30 seconds, and then plug it back again. * Turn off the printer, wait for about 10 seconds, and then turn the printer back on. * Update the network firmware in the printer or the print server.
J
Jennifer AdamsAug 31, 2025
What to do if my Lexmark M3150dn says 'Imaging unit low'?
- R
  rodney25Aug 31, 2025
  If your Lexmark printer displays an 'Imaging unit low' message, you may need to order a new imaging unit. If necessary, press on the printer control panel to clear the message and continue printing.
R
Rachel RobertsonSep 1, 2025
How to fix streaked horizontal lines on Lexmark M3150dn prints?
- M
  Matthew HaydenSep 1, 2025
  To fix streaked horizontal lines on prints from your Lexmark printer, specify the tray or feeder from Printing Preferences or the Print dialog. Alternatively, set the paper type and weight in the Paper menu to match the paper loaded in the tray from the printer control panel. Loading paper from a fresh package, reinstalling the imaging unit, or replacing the imaging unit may also help.