PostScript
Menu item Description
Print PS Error
O*
On
Print a test page that contains the PostScript error.
Minimum Line Width
1–30 (2*)
Set the minimum stroke width of any job printed in 1200 dpi.
Lock PS Startup Mode
O*
On
Disable the SysStart file.
Image Smoothing
O*
On
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no eect on images with a resolution of 300 dpi or
higher.
Font Priority
Resident*
Flash/Disk
Establish the font search order.
Notes:
• Resident sets the printer to search its memory for the requested font
before searching flash memory or hard disk.
• Flash/Disk sets the printer to search the flash memory or printer hard
disk for the requested font before searching printer memory.
• This menu item appears only when a flash memory or printer hard
disk is installed.
Wait Timeout
O
On*
Set the printer to wait for additional data before canceling a print job.
Note: When set to On, 40 seconds is the factory default setting.
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item Description
Font Source
Resident*
Disk
Download
Flash
All
Specify the source of the fonts that are displayed in the Font Name menu
item.
Note: Make sure that the hard disk and flash option are not
password‑protected.
Font Name
[List of available fonts]
Choose a font from the specified font source.
Notes:
• Courier is the factory default setting.
• The available fonts may vary depending on your printer model.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 54
To Next Page
Loading...
