Lexmark M5270 - Tray Pick and Lift Drive

Tray pick and lift drive
1 Lift plate
2 Pick roller
3 Sensor (pick roller index)
4 Motor (pick/lift)
5 Separator pad
The lift plate lifts the paper until the sensor (pick roller index) is triggered. The motor (pick/lift) starts, and then
enables the pick roller to feed the paper into the printer or upper trays.
Note: The motor (pick/lift) also drives the lift plate when rotating in reverse.
To avoid multiple‑sheet picking, the friction from the separator pad prevents the extra paper from entering the
printer.
4064
Theory of operation
885