Lexmark MC3426 User Manual

Printer model Analog fax
etherFAX
1
Fax server
Fax over IP (FoIP)
2
MC3326adwe
MC3326i X
MC3426adw
MC3426i X
XC2326
1
Needs a subscription. For more information, go to https://www.etherfax.net/lexmark or contact the place where
you purchased the printer.
2
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Setting up the fax function using analog fax
Notes:
• This feature is available only in some printer models.
• Some connection methods are applicable only in some countries or regions.
• If the fax function is enabled and not fully set up, then the indicator light may blink red.
• If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Using the fax setup wizard in the printer
Notes:
• The setup wizard is available only if no device‑based fax, such as analog, etherFAX, or Fax over IP (FoIP),
is configured.
Set up, install, and configure 25

Lexmark MC3426 Specifications

General

Scan Technology	CIS
Print Technology	Laser
Print Resolution	600 x 600 dpi
Standard Connectivity	Ethernet, USB
Standard Paper Input	250 sheets
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Operating System Compatibility	Windows, Mac, Linux