Lexmark MC3426 User Manual

Setting Value
Device Password Account password or app password
Notes:
• For accounts with two‑step verification disabled, use your account
password.
• For outlook.com or hotmail.com accounts with two‑step verification
enabled, use an app password. To create an app password, go to the
Outlook Live Account Management page, and then log in to your
account.
Note: For additional setup options for business using Microsoft 365, go to the Microsoft 365 help page.
QQ Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the QQ Mail
home page, click Settings > Account. From the POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV Service
section, enable either POP3/SMTP service or IMAP/SMTP service.
Setting Value
Primary SMTP Gateway smtp.qq.com
Primary SMTP Gateway Port 587
Use SSL/TLS Required
Require Trusted Certificate Disabled
Reply Address You r e ‑mail address
SMTP Server Authentication Login / Plain
Device‑Initiated E‑mail Use Device SMTP Credentials
Device UserID You r e ‑mail address
Device Password Authorization code
Note: To generate an authorization code, from the QQ Mail home page, click
Settings > Account, and then from the
POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV Service section, click
Generate authorization code.
Sina Mail
Note: Make sure that the POP3/SMTP service is enabled on your account. To enable the service, from the
Sina Mail home page, click Settings > More settings > User‑end POP/IMAP/SMTP, and then enable
POP3/SMTP service.
Setting Value
Primary SMTP Gateway smtp.sina.com
Primary SMTP Gateway Port 587
Use SSL/TLS Required
Require Trusted Certificate Disabled
Set up, install, and configure 38

Lexmark MC3426 Specifications

General

Scan Technology	CIS
Print Technology	Laser
Print Resolution	600 x 600 dpi
Standard Connectivity	Ethernet, USB
Standard Paper Input	250 sheets
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Operating System Compatibility	Windows, Mac, Linux