Lexmark MS315 - Page 256

Assembly 1: Covers
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8520 1 1 Dust cover (250‑sheet tray)
“Dust cover removal” on page 232
2 40X8054 1 1 Rear door and cover
“Rear door and cover removal” on page
232
3 40X8052 1 1 Right cover
“Right cover removal” on page 185
4 40X8056 1 1 Front access cover
“Front access cover removal” on page 211
5 40X9148 1 1 Cartridge plunger
“Cartridge plunger removal” on page 195
6 40X8303 1 1 250-sheet tray N/A
7 40X8302 1 1 MPF assembly
“MPF assembly removal” on page 203
8 40X8051 1 1 Nameplate
“Nameplate removal” on page 199
9 40X8059 1 1 Control panel assembly
Note: Does not include
the UICC.
“Control panel assembly removal” on
page 199
“UICC removal” on page 202
10 40X9659 1 1 Bezel (MS315)
“Bezel removal” on page 198
10 40X9660 1 1 Bezel (MS415 and M1140+)
“Bezel removal” on page 198
11 40X8053 1 1 Left cover
“Left cover removal” on page 168
12 40X8055 1 1 Top cover
“Top cover removal” on page 239
NS 40X8273 4 40 Rubber foot N/A
4514
Parts catalog
256