Flash memory full [52]
Try one or more of the following:
• From the printer control panel, press to clear the message and continue printing.
• Delete fonts, macros, and other data stored in the
flash
memory. From the printer control panel, navigate
to:
> Settings > > Print Settings > > Utilities Menu > > Format Flash > > Ye s >
• Use a larger‑capacity flash memory card.
Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the printer
is powered o or restarted.
Flash memory unformatted [53]
Try one or more of the following:
• From the printer control panel, press to stop the defragmentation and continue printing.
• Format the
flash
memory device.
Note: If the error message remains, then the flash memory device may be defective and need to be
replaced.
Memory low, no Resource Save [35]
Try one or more of the following:
• From the printer control panel, press to disable Resource Save, clear the message, and continue
printing.
• Install additional printer memory.
Network error, port [x] [54]
Try one or more of the following:
• From the printer control panel, press to clear the message and continue printing.
• Unplug the router, wait for 30 seconds, and then plug it back again.
• Turn o the printer, wait for about 10 seconds, and then turn the printer back on.
• Update the network
firmware
in the printer or the print server. For more information, visit the Lexmark
Web site at
http://support.lexmark.com.
Network error, standard port [54]
Try one or more of the following:
• From the printer control panel, press to clear the message and continue printing.
• Unplug the router, wait for 30 seconds, and then plug it back again.
Troubleshooting 144
To Next Page
Loading...
Need help?
General
