Load multipurpose feeder with [custom string] [orientation]
Try one or more of the following:
• Load the feeder with the correct paper size and type.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Load multipurpose feeder with [paper size] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct paper size.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Load multipurpose feeder with [paper type] [paper size] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct paper size and type.
• Depending on your printer model, touch Continue or press to clear the message and continue
printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
• Cancel the current job.
Memory full [38]
Try one or more of the following:
• From the printer control panel, press to clear the message.
• Decrease the resolution setting.
• Install additional printer memory.
Non‑Lexmark [supply type], see User’s Guide [33.xy]
Note: The supply type can be toner cartridge or imaging unit.
The printer has detected a non‑Lexmark supply or part installed in the printer.
Troubleshooting 154
To Next Page
Loading...
Need help?
General
