An optional memory card can be purchased separately and attached to the controller board.
1 Access the controller board.
For the MS510dn and MS610dn printer models, see “Accessing the controller board” on page 39.
For the MS610de printer model, see “Accessing the controller board” on page 73.
2 Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3 Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
Additional printer setup 15
To Next Page
Loading...
