EasyManuals Logo

Lexmark MS521 User Guide

Lexmark MS521
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
3 Select Start PIN Method, and then press .
4 Copy the eightdigit WPS PIN.
5 Open a web browser, and then type the IP address of your access point in the address
field.
Notes:
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
6 Access the WPS settings. For more information, see the documentation that came with your access
point.
7 Enter the eightdigit PIN, and then save the changes.
Deactivating the WiFi network
1 From the printer control panel, navigate to:
Settings > Network/Ports > Network Overview > Active Adapter > Standard Networking
For non-touch-screen printer models, press
to navigate through the settings.
2 Follow the instructions on the display.
Cleaning the printer
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
Notes:
Perform this task after every few months.
Damage to the printer caused by improper handling is not covered by the printer warranty.
1 Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Remove paper from the standard bin and multipurpose feeder.
3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.
4 Wipe the outside of the printer with a damp, soft, lintfree cloth.
Notes:
Do not use household cleaners or detergents, as they may damage the finish of the printer.
Make sure that all areas of the printer are dry after cleaning.
5 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Maintaining the printer 66

Table of Contents

Other manuals for Lexmark MS521

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS521 and is the answer not in the manual?

Lexmark MS521 Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 46 ppm
Print Resolution1200 x 1200 dpi
Monthly Duty CycleUp to 120, 000 pages
Processor Speed1 GHz
Standard Output Capacity250 sheets
Operating System CompatibilityWindows, Mac OS, Linux
Hard DriveOptional
Recommended Monthly Page Volume2000 - 15000 pages
Duplex PrintingStandard
ConnectivityUSB, Ethernet
Media Types SupportedPaper Labels, Card Stock, Envelopes, Plain Paper, Transparencies

Related product manuals