What does 'Imaging unit low [84.xy]' mean on Lexmark MS610 and what should I do?
If your Lexmark printer displays the message 'Imaging unit low', it means you may need to order a new imaging unit. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.
How to address 'Insufficient memory to collate job [37]' on Lexmark MS610 Printer?
To handle the 'Insufficient memory to collate job' message on your Lexmark printer, select Continue on the printer control panel to print the part of the job already stored and begin collating the rest of the print job. If you have a non-touch-screen printer model, press to confirm. Alternatively, you can cancel the current print job.
What to do if Lexmark Printer says 'Complex page, some data may not have printed [39]'?
If your Lexmark printer displays the message 'Complex page, some data may not have printed', you can select Continue from the printer control panel to ignore the message and continue printing. If you have a non-touch-screen printer model, press to confirm. You can also cancel the current print job, or install additional printer memory.
What does 'Cartridge nearly low [88.xy]' mean on Lexmark Printer and how to fix it?
When your Lexmark printer displays the 'Cartridge nearly low' message, you can select Continue on the printer control panel to clear the message and continue printing. If you have a non-touch-screen printer model, press to confirm.
How to solve 'Change [paper source] to [custom type name] load [orientation]' error on Lexmark MS610 Printer?
To resolve the 'Change [paper source] to [custom type name] load [orientation]' error on your Lexmark printer, load the correct size and type of paper in the tray, and then press on the control panel. Alternatively, select Use current [paper source] on the control panel to clear the message and continue printing using the current size and type of paper in the tray. You can also cancel the print job.
How to fix 'Memory full' [38] error on Lexmark MS610?
To resolve the 'Memory full' error on your Lexmark printer, select Cancel job on the printer control panel. If you have a non-touch-screen printer, press to confirm. Alternatively, you can install additional printer memory.
What to do if Lexmark Printer shows 'Cartridge very low, [x] estimated pages remain [88.xy]'?
If your Lexmark printer displays the message 'Cartridge very low, [x] estimated pages remain', you may need to replace the toner cartridge very soon. If necessary, select Continue on the printer control panel to clear the message and continue printing. For non-touch-screen printer models, press to confirm.
How to resolve 'Load [paper source] with [custom string] [paper orientation]' on Lexmark Printer?
To fix the 'Load [paper source] with [custom string] [paper orientation]' message on your Lexmark printer, load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm. You can also cancel the current job.
What to do if Lexmark Printer displays 'Replace cartridge, printer region mismatch [42.xy]'?
If your Lexmark printer shows 'Replace cartridge, printer region mismatch', install a toner cartridge that matches the region number of the printer. 'x' indicates the value of the printer region, and 'y' indicates the value of the cartridge region.
How to resolve 'Load [paper source] with [custom type name] [paper orientation]' message on Lexmark Printer?
To resolve the 'Load [paper source] with [custom type name] [paper orientation]' message on your Lexmark printer, load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. For non-touch-screen printer models, press to confirm. You can also cancel the current job.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 50 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 800 MHz |
| Standard Memory | 256 MB |
| Maximum Memory | 1280 MB |
| Maximum Paper Size | 8.5 x 14 inches |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Connectivity | Ethernet |
| Input Capacity | Up to 650 pages |
| Duplex Printing | Yes |
Defines notes, warnings, and cautions used in the guide to convey important information and potential hazards.
Provides general and specific information on using the printer models covered in the user's guide.
Explains how to find information using tables of contents, search functions, or online resources.
Details available internal options like memory, hard disks, and interface cards for printer setup.
Describes the process of installing an optional card onto the printer's controller board.
Provides instructions for installing a memory card onto the printer's controller board.
Details the steps for installing a Lexmark Internal Solutions Port (ISP) option.
Guides the user through the process of installing a printer hard disk.
Provides step-by-step instructions for installing optional paper trays for the printer.
Explains how to obtain and install the necessary printer software.
Details how to manually add installed hardware options in the print driver for availability.
Outlines necessary information and prerequisites for setting up the printer on a wireless network.
Guides users on connecting the printer to a wireless network using the Wireless Setup Wizard.
Explains how to connect the printer to a wireless network using Wi-Fi Protected Setup (WPS) methods.
Details the process of connecting the printer to a wireless network via the Embedded Web Server.
Introduces the printer models and their configurations, including diagrams of components.
Describes the physical configurations and components of the MS510dn and MS517dn printers.
Details the physical configurations and components of the MS610dn and MS617dn printers.
Explains the functions of the printer's control panel buttons and display for operation.
Describes the meaning of different colors for the Sleep button and indicator lights.
Details how to set paper size and type using the printer control panel menus.
Explains how to define custom paper sizes not preset in the printer menus.
Describes the capacity and function of the standard paper bin and its paper stop.
Provides step-by-step instructions for loading paper into the printer trays.
Guides users on how to load paper and specialty media into the multipurpose feeder.
Details how to create custom names for paper types using the Embedded Web Server or control panel.
Explains how to assign custom paper types to trays for specific print jobs.
Provides instructions on how to print documents from a computer.
Explains how to adjust toner darkness using the Embedded Web Server or control panel.
Covers printing from mobile devices using Mopria, Google Cloud Print, and AirPrint.
Guides users on sending documents to the printer using Lexmark Mobile Print.
Explains how to print documents directly from a USB flash drive.
Outlines different types of print jobs that can be stored and managed in the printer.
Explains the process of printing jobs that have been stored or held in the printer.
Describes how to print a list of fonts available for the printer.
Explains how to print a list of resources stored on flash memory or hard disk.
Directs users to other guides for advanced networking and administrative tasks.
Explains how the virtual display on the Embedded Web Server works.
Guides on setting up alerts for supply levels via the Embedded Web Server.
Guides on viewing the status of printer parts and supplies via the control panel.
Explains how to check parts and supplies status using the Embedded Web Server.
Details how to use Eco-Mode to reduce energy, paper, and toner consumption.
Explains how to enable Quiet Mode to reduce printer noise, potentially affecting print speed.
Describes how to use a security lock to physically secure the printer.
Explains printer memory types and when data is erased.
Explains how to configure printer hard disk encryption using the control panel.
Provides advice for printing on card stock, envelopes, labels, letterhead, and transparencies.
Offers advice for printing on card stock, including paper type and temperature considerations.
Provides guidance for printing on envelopes, including recommended types and those to avoid.
Offers advice for printing on labels, including supported types and design considerations.
Provides guidance for loading and printing on letterhead.
Offers advice for printing on transparencies, including temperature and handling.
Discusses paper weight, curl, smoothness, moisture, and grain direction affecting quality.
Details the supported paper weights for different printer trays and feeders.
Explains paper curl and its potential impact on feeding and print quality.
Discusses paper smoothness and its effect on print quality and feeding.
Explains how paper moisture content affects print quality and feeding.
Defines grain direction and its importance for paper handling.
Lists paper types that are not recommended for use with the printer.
Provides guidelines to prevent jams and ensure quality printing by selecting the right paper.
Offers guidelines for selecting preprinted forms and letterhead for optimal printing.
Lists supported paper sizes for standard, optional, multipurpose, and duplex modes.
Details supported paper types and their corresponding weights for different feeders.
Provides an overview of available menus like Paper, Reports, Network/Ports, Security, Settings, and Help.
Covers Default Source, Paper Size/Type, Multipurpose Feeder, Manual, and Custom menus.
Explains how to set a default paper source for all print jobs.
Details setting paper size and type for each tray and the multipurpose feeder.
Explains setting the paper size for the multipurpose feeder.
Explains setting the paper type for the multipurpose feeder.
Details setting the paper size for manually loaded paper.
Explains setting the paper type for manually loaded paper.
Details setting the envelope size for manually loaded envelopes.
Explains setting the envelope type for manually loaded envelopes.
Determines when the printer selects paper from the multipurpose feeder.
Allows substituting a specified paper size when the requested size is unavailable.
Specifies the relative texture of plain paper, card stock, transparencies, and recycled paper.
Specifies the relative texture of labels loaded.
Specifies the relative texture of bond paper loaded.
Specifies the relative texture of envelopes loaded.
Specifies the relative texture of rough envelopes loaded.
Specifies the relative texture of letterhead loaded.
Specifies the relative texture of preprinted paper loaded.
Specifies the relative texture of colored paper loaded.
Specifies the relative texture of light paper loaded.
Specifies the relative texture of heavy paper loaded.
Specifies the relative texture of cotton paper loaded.
Specifies the relative texture of custom paper loaded.
Specifies the relative weight of plain, card stock, transparency, recycled, labels, bond, envelope papers.
Specifies the relative weight of plain paper loaded.
Specifies the relative weight of card stock loaded.
Specifies the relative weight of transparencies loaded.
Specifies the relative weight of recycled paper loaded.
Specifies the relative weight of labels loaded.
Specifies the relative weight of bond paper loaded.
Specifies the relative weight of envelopes loaded.
Specifies the relative weight of rough envelopes loaded.
Specifies the relative weight of letterhead loaded.
Specifies the relative weight of preprinted paper loaded.
Specifies the relative weight of colored paper loaded.
Specifies that the weight of the paper loaded is light.
Specifies that the weight of the paper loaded is heavy.
Specifies the relative weight of cotton or rough paper loaded.
Specifies the relative weight of custom paper loaded.
Determines and sets two-sided printing for various paper types.
Determines and sets two-sided printing for recycled paper jobs.
Determines and sets two-sided printing for bond paper jobs.
Determines and sets two-sided printing for letterhead jobs.
Determines and sets two-sided printing for preprinted paper jobs.
Determines and sets two-sided printing for colored paper jobs.
Determines and sets two-sided printing for light paper jobs.
Determines and sets two-sided printing for heavy paper jobs.
Determines and sets two-sided printing for custom paper jobs.
Associates paper types with custom names and specifies recycled paper types.
Associates a paper or specialty media type with a Custom Type name.
Specifies a paper type when the Recycled setting is selected in other menus.
Specifies a custom name for a paper type, replacing the default Custom Type name.
Allows setting units of measure, portrait width/height, and feed direction.
Identifies the units of measure for printer settings (inches or millimeters).
Specifies the portrait width setting for paper.
Specifies the portrait height setting for paper.
Specifies the feed direction for paper loaded in either direction.
Provides options to print various reports like menu settings, device statistics, and network setup pages.
Prints a report with information on paper, memory, page count, alarms, and network status.
Prints a report containing printer statistics like supply information and page details.
Prints a report with network printer settings and TCP/IP information.
Prints a list of profiles stored in the printer.
Prints a report of all available fonts for the current printer language.
Explains printing a list of resources stored on flash memory or hard disk.
Prints a report containing printer asset information, like serial number and model name.
Prints a summary of all logged events in the printer.
Covers Active NIC, Standard Network, TCP/IP, IPv6, Wireless, and AppleTalk menus.
Allows viewing and setting the active network interface card.
Allows settings for standard network ports, like Energy Efficient Ethernet.
Sets the printer to switch to PCL emulation based on print job requirements.
Sets the printer to switch to PS emulation based on print job requirements.
Sets the printer for special processing for bidirectional communication.
Sets the size of the network input buffer.
Temporarily stores print jobs in the printer hard disk before printing.
Sets the printer to process Macintosh binary PostScript print jobs.
Shows and sets printer network settings, including reports and card status.
Prints a report detailing network printer settings and TCP/IP address.
Allows viewing card status, speed, and network addresses.
Allows viewing the connection status of the network card.
Allows viewing the speed of an active network card.
Allows viewing the printer's network addresses (UAA, LAA).
Sets the time for a network print job to be canceled if it times out.
Enables or disables banner pages for print jobs.
Covers hostname, IP address, netmask, gateway, DHCP, RARP, BOOTP, AutoIP, FTP/TFTP, HTTP, WINS settings.
Sets the host name for the printer on the network.
Allows viewing or changing the current TCP/IP address of the printer.
Allows viewing or changing the current TCP/IP netmask.
Allows viewing or changing the current TCP/IP gateway.
Specifies DHCP address and parameter assignment for the printer.
Specifies the RARP address assignment setting.
Specifies the BOOTP address assignment setting.
Specifies the Zero Configuration Networking setting.
Enables the built-in FTP server for sending files via FTP.
Enables the built-in Web server for remote monitoring and management.
Allows viewing or changing the current WINS server address.
Covers IPv6 enablement, auto-configuration, hostname, address, and DHCPv6 settings.
Enables Internet Protocol Version Six (IPv6) for network addressing.
Specifies acceptance of automatic IPv6 address configuration from a router.
Sets the printer's host name for network identification.
Allows viewing the current IPv6 addresses of the printer.
Allows viewing the current router address for IPv6.
Enables DHCPv6 for automatic IPv6 address configuration.
Covers Wi-Fi Protected Setup, Network Mode, Compatibility, and network selection.
Establishes a wireless network and enables network security using Push Button or PIN methods.
Connects the printer to a wireless network using the WPS push button method.
Connects the printer to a wireless network using a WPS PIN.
Automatically detects WPS connection methods (Push Button or PIN).
Specifies the network mode (Infrastructure or Ad hoc).
Specifies the wireless standard for the network (e.g., 802.11b/g/n).
Allows selection of an available network for the printer to use.
Allows viewing the quality of the wireless connection.
Allows viewing the encryption method for the wireless network.
Enables or disables AppleTalk support and shows assigned name/address.
Enables or disables AppleTalk support for network communication.
Covers PCL/PS SmartSwitch, NPA Mode, USB Buffer, Job Buffering, Mac Binary PS, and ENA settings.
Sets the printer to switch to PCL emulation via USB port when required.
Sets the printer to switch to PS emulation via USB port when required.
Sets the printer for special processing for bidirectional communication via USB.
Sets the size of the USB input buffer for data processing.
Temporarily stores print jobs on the printer hard disk before printing via USB.
Sets the printer to process Macintosh binary PostScript print jobs via USB.
Sets the network address for an external print server via USB.
Sets the netmask information for an external print server via USB.
Settings for parallel port connections, only available with an optional parallel card.
Sets the printer to switch to PCL emulation via serial port when required.
Sets the printer to switch to PS emulation via serial port when required.
Sets the printer for special processing for bidirectional communication via serial port.
Sets the size of the parallel input buffer for data processing.
Temporarily stores print jobs on the printer hard disk before printing via parallel port.
Enables bidirectional communication through the parallel port.
Specifies the parallel port protocol (Standard or Fastbytes).
Determines if the printer honors hardware initialization requests from the computer.
Determines if parallel port data is sampled on the leading or trailing edge of a strobe.
Sets the printer to process Macintosh binary PostScript print jobs via parallel port.
Sets the network address for an external print server via parallel port.
Sets the netmask for an external print server via parallel port.
Sets the gateway information for an external print server via parallel port.
Configures SMTP server, timeout, reply address, SSL, and authentication settings.
Specifies SMTP server gateway and port information for email.
Sets the time before the server stops trying to send an email.
Specifies a reply address for emails sent by the printer.
Sets the printer to use SSL for secure connection to the SMTP server.
Specifies the required user authentication type for scan-to-email.
Specifies credentials for communicating with the SMTP server for device-initiated emails.
Specifies credentials for communicating with the SMTP server for user-initiated emails.
Covers security settings like login restrictions, PIN length, confidential print, and audit logs.
Covers login restrictions, PIN length, and timeouts for panel/remote access.
Limits failed login attempts to prevent user lockout.
Limits the digit length of the Personal Identification Number (PIN).
Manages confidential print jobs including PIN limits, expiration, repeat, verify, and reserve settings.
Limits the number of invalid PIN entry attempts before jobs are deleted.
Limits the time a confidential print job stays in the printer before deletion.
Sets a time limit for how long the printer stores print jobs.
Sets a time limit for storing jobs needing verification.
Sets a time limit for storing jobs for printing at a later time.
Manages the security audit log, allowing export, deletion, and configuration.
Allows authorized users to export the audit log from the printer.
Specifies whether audit logs are deleted or kept.
Specifies how and whether audit logs are created and sent remotely.
Deletes print job data not currently in use from the printer hard disk.
Allows setting the printer's date, time, time zone, DST, and NTP synchronization.
Shows the current date and time settings for the printer.
Allows manual entry of the date and time for the printer.
Allows selection of the printer's time zone.
Sets the printer to use Daylight Saving Time based on the Time Zone setting.
Enables Network Time Protocol to synchronize printer clocks with network devices.
Covers General Settings, Keyboard, Paper Sizes, Displayed Information, and Home Screen Customization.
Covers display language, supply estimates, Eco-Mode, and Quiet Mode settings.
Sets the language of the text displayed on the printer.
Controls whether supply estimates are shown on the control panel and other interfaces.
Minimizes the use of energy, paper, or specialty media.
Reduces printer noise, potentially affecting print speed.
Executes the printer's initial setup wizard.
Specifies language and custom key information for the on-screen keyboard.
Specifies the unit of measurement for paper sizes (US or Metric).
Specifies display information in the upper corners of the home screen (e.g., IP Address, Model Name).
Specifies the display information shown in the upper left corner of the home screen.
Specifies the display information shown in the upper right corner of the home screen.
Specifies display information for Black Toner status and custom text.
Specifies display information related to the black toner status.
Customizes display information for menus like Paper Jam, Load Paper, and Service Errors.
Customizes display information for paper jam menus.
Customizes display information for load paper menus.
Customizes display information for service error menus.
Allows changing the icons that appear on the printer's home screen.
Formats the printer's date display (MM-DD-YYYY, DD-MM-YYYY, YYYY-MM-DD).
Formats the printer's time display (12-hour or 24-hour format).
Specifies the brightness level for the printer's display.
Sets the volume and feedback for printer buttons and speakers.
Sets the volume and feedback for printer buttons.
Sets the speaker volume for audio feedback.
Specifies whether to display Bookmarks from the Held Jobs area.
Sets the interval between Embedded Web Server refreshes.
Specifies a contact name for the printer, stored on the Embedded Web Server.
Specifies the printer location, stored on the Embedded Web Server.
Sets alarms for when the printer requires user intervention or for cartridge status.
Sets alarms for when the printer requires user intervention.
Sets cartridge-specific alarms for low or critical levels.
Manages timeouts for Standby Mode, Sleep Mode, Print Timeout, and Job Hold Timeout.
Sets the idle time before the printer enters a lower power state.
Sets the idle time before the printer enters Sleep Mode.
Prints a job with the display turned off.
Sets the time before the printer enters Hibernate mode.
Sets the printer to Hibernate mode even with an active Ethernet connection.
Sets the idle time before the display automatically returns to Ready state.
Resets the Screen Timeout timer instead of returning to the home screen.
Sets the printer to end a job after a specified idle time.
Sets the time the printer waits to receive data from the host.
Sets the time the printer waits for user intervention before holding jobs.
Configures printer behavior during errors, including auto-reboot settings.
Sets the printer to restart when an error occurs.
Determines the number of automatic reboots the printer can perform.
Manages automatic continuation and jamming recovery for print jobs.
Lets the printer automatically continue printing from certain offline situations.
Specifies whether the printer reprints jammed pages.
Sets the printer to check for jammed paper automatically.
Sets the printer to print the correct output for a page.
Adjusts speech rate, headphone volume, and screen timeout for accessibility.
Adjusts the voice guidance speaking rate.
Sets the volume for headphones used with the printer.
Controls sending anonymous usage and performance data to Lexmark.
Sends anonymous device usage information to Lexmark.
Sends anonymous device function and error information to Lexmark.
Sets the time for sending anonymous information to Lexmark.
Determines how the printer reacts to a short press of the Sleep button.
Determines how the printer reacts to a long press of the Sleep button.
Restores printer factory default settings, excluding Network/Ports menus.
Selects a custom message to display as an alternating status indicator.
Exports configuration files to a flash drive.
Manages print copies, paper source, collation, and duplex settings for flash drive printing.
Specifies the default number of copies for each print job.
Sets a default paper source for all print jobs.
Stacks pages of a print job in sequence when printing multiple copies.
Specifies two-sided printing as the default for all print jobs.
Defines how two-sided pages are bound and printed (Long Edge or Short Edge).
Specifies the orientation of a multiple-page document for Paper Saver.
Prints multiple-page images on one side of a paper.
Prints a border around each page image when using Paper Saver.
Specifies whether blank separator sheets are inserted between pages, copies, or jobs.
Specifies the paper source for separator sheets.
Specifies whether blank pages are inserted into print jobs.
Covers printer language and print area settings.
Configures printer language (PCL/PostScript) and printable area.
Sets the default printer language (PCL Emulation or PostScript Emulation).
Sets the logical and physical printable area for documents.
Sets the storage location for downloads (RAM or Flash memory).
Specifies how the printer handles temporary downloads when memory is low.
Specifies the order for printing held and confidential jobs.
Manages duplex printing, binding, copies, and blank page insertion.
Specifies two-sided printing as the default for all print jobs.
Defines how two-sided pages are bound and printed.
Specifies the default number of copies for each print job.
Specifies whether blank pages are inserted into print jobs.
Stacks pages of a print job in sequence when printing multiple copies.
Specifies whether blank separator sheets are inserted.
Specifies the paper source for separator sheets.
Prints multiple-page images on one side of a paper.
Specifies the positioning of multiple-page images when using Paper Saver.
Specifies the orientation of a multiple-page document.
Prints a border when using Paper Saver.
Manages print quality settings like resolution, pixel boost, toner darkness, and contrast.
Specifies the printed output resolution in dots per inch.
Enables more pixels to print in clusters for clarity or to enhance fonts.
Lightens or darkens the printed output to adjust toner usage.
Enables a print mode preferable for files like drawings and diagrams.
Automatically adjusts contrast enhancement applied to images.
Adjusts the printed output by lightening or darkening it to conserve toner.
Adjusts the contrast of printed objects.
Tracks and logs print jobs when a printer hard disk is installed.
Prints and deletes log files or exports them to a flash drive.
Sets how often a log file is created (Daily, Weekly, Monthly).
Sets how the printer responds when the frequency threshold expires.
Specifies the maximum log file size before the printer executes Log Action at Near Full.
Sets how the printer responds when the hard disk is nearly full.
Sets how the printer responds when disk usage reaches the maximum limit.
Sets where the printer posts job accounting logs.
Specifies the email address for sending job accounting logs.
Specifies the prefix for the log file name.
Manages held jobs, flash memory formatting, downloads deletion, Hex Trace, and coverage estimation.
Deletes confidential and held jobs from the printer hard disk.
Formats the printer's flash memory, deleting all stored data.
Deletes downloads, held jobs, buffered jobs, and parked jobs from the hard disk.
Assists in isolating print job problems by printing data in hexadecimal format.
Provides an estimate of toner coverage percentage on printed pages.
Manages XPS error page printing.
Prints a page containing error information, including XML markup errors.
Manages PDF scaling and annotation printing.
Scales page content to fit the selected paper size for PDF printing.
Prints annotations within PDF documents.
Manages PostScript error printing, startup mode, and font priority.
Prints a page containing PostScript error information.
Disables the SysStart file for PostScript startup.
Establishes the font search order (Resident, Flash/Disk).
Manages PCL emulation settings for font source, name, symbol set, point size, pitch, and orientation.
Specifies the set of fonts used by the Font Name menu.
Identifies a specific font and its storage option (e.g., Courier 10).
Specifies the symbol set for each font name.
Configures point size, pitch, and orientation for PCL fonts.
Changes the point size for scalable typographic fonts.
Specifies the font pitch for scalable monospaced fonts.
Specifies the orientation of text and graphics on the page (Portrait or Landscape).
Specifies the number of lines that print on each page.
Sets the printer to print on A4-size paper.
Specifies if the printer automatically performs a carriage return after a line feed.
Specifies if the printer automatically performs a line feed after a carriage return.
Configures printer software to use different source assignments for trays and feeders.
Displays factory defaults and allows restoring tray/feeder assignments.
Displays the factory default setting assigned to each tray or feeder.
Restores all tray and feeder assignments to their factory default settings.
Sets the default font for HTML documents.
Identifies a specific font and its storage option (e.g., Courier 10).
Sets the default font size for HTML documents.
Scales the default font for HTML documents.
Sets the page orientation for HTML documents.
Sets the page margin for HTML documents.
Specifies whether to print backgrounds on HTML documents.
Manages image settings like auto fit, inversion, and scaling.
Selects optimal paper size, scaling, and orientation for images.
Inverts bitonal monochrome images.
Scales the image to fit the selected paper size.
Sets the image orientation for printing.
Provides access to guides for printing, media, defects, menus, connections, moving, and supplies.
Prints all available guides.
Provides information about solving print quality issues.
Provides information about loading paper and specialty media.
Lists paper sizes supported in trays and feeders.
Helps determine causes of repeating print quality defects and lists settings.
Provides a list of control panel menus and settings.
Provides help in locating additional information.
Provides information about connecting the printer locally (USB) or to a network.
Provides instructions for safely moving the printer.
Provides information about ordering printer supplies.
Discusses reducing carbon footprint via recycled paper and efficient printing suggestions.
Discusses Lexmark's support for recycled paper in laser printers.
Offers tips for conserving supplies like paper and toner during printing.
Guides on returning Lexmark products for recycling through the collection program.
Provides safety precautions and steps for cleaning the printer's exterior and interior.
Information on how to order Lexmark authorized supplies and parts.
Emphasizes using genuine Lexmark parts for performance and warranty.
Provides step-by-step instructions for replacing the toner cartridge.
Provides safety guidelines for moving the printer to avoid injury or damage.
Provides tips on proper paper loading to prevent jams.
Ensures paper is loaded flat, below the fill indicator, and guides are aligned.
Recommends using specific paper types and avoiding wrinkled or curled paper.
Identifies common locations for paper jams within the printer.
Provides steps to clear paper jams found in the printer's front door area.
Provides steps to clear paper jams found in the printer's rear door area.
Provides steps to clear paper jams found in the printer's standard paper bin.
Provides steps to clear paper jams found in the printer's duplex unit.
Provides steps to clear paper jams found in the printer's paper trays.
Provides steps to clear paper jams found in the printer's multipurpose feeder.
Lists and explains various printer messages and error codes for troubleshooting.
Addresses mismatches between toner cartridges and imaging units, or MICR vs. non-MICR supplies.
Provides guidance for when the toner cartridge is nearly low.
Provides guidance for when the toner cartridge is low.
Advises on when to replace the toner cartridge based on estimated remaining pages.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type or using current loaded paper.
Instructions for closing the printer's front door.
Troubleshooting steps for complex pages where data may not print correctly.
Addresses issues where held jobs are invalidated after printer configuration changes.
Troubleshooting steps for detecting a defective flash memory card.
Instructions for handling errors related to unsupported USB devices.
Instructions for handling errors related to unsupported USB hubs.
Provides guidance for when the imaging unit is low.
Provides guidance for when the imaging unit is nearly low.
Advises on when to replace the imaging unit based on estimated remaining pages.
Troubleshooting for incorrect paper size or type loaded in the source.
Instructions for inserting a specific printer tray.
Addresses insufficient memory issues when using the Resource Save feature.
Troubleshooting for insufficient memory when collating print jobs.
Addresses insufficient memory when defragmenting flash memory.
Explains why held jobs might be deleted to process current jobs.
Troubleshooting for held jobs that cannot be restored after changes.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type or using current loaded paper.
Guides on loading correct paper size/type into the multipurpose feeder.
Guides on loading correct paper size/type into the multipurpose feeder.
Guides on loading correct paper size into the multipurpose feeder.
Guides on loading correct paper size/type into the multipurpose feeder.
Provides guidance for when the maintenance kit is low.
Provides guidance for when the maintenance kit is nearly low.
Advises on when to replace the maintenance kit.
Troubleshooting for insufficient memory or flash memory defragmentation issues.
Troubleshooting steps for network software errors.
Addresses issues with non-Lexmark supplies and potential warranty impacts.
Troubleshooting for insufficient flash memory for storing resources.
Troubleshooting steps for when the parallel port is disabled.
Guidance for when the printer restarts and the last job may be incomplete.
Instructions for reinstalling a missing or unresponsive toner cartridge.
Instructions for reinstalling a missing or unresponsive imaging unit.
Instructions for removing paper from the standard output bin.
Advises on replacing the toner cartridge when 0 pages remain.
Addresses issues with installing a toner cartridge for the wrong printer region.
Advises on replacing the imaging unit when 0 pages remain.
Informs when the printer requires maintenance and how to proceed.
Instructions for replacing an unsupported toner cartridge with a supported one.
Instructions for replacing an unsupported imaging unit with a supported one.
Troubleshooting steps for serial port communication errors.
Troubleshooting steps for when the printer display is blank.
Troubleshooting steps for issues with detecting or operating internal options.
Steps to diagnose why an internal option is not being detected by the printer.
Troubleshooting steps for issues related to printer trays not working correctly.
Troubleshooting steps for when the Internal Solutions Port is not functioning.
Troubleshooting steps for USB or parallel interface card issues.
Troubleshooting steps for recurring paper jams and feed issues.
Steps to resolve frequent paper jamming issues in the printer.
Troubleshooting for when the paper jam message persists after clearing.
Steps to enable and ensure that jammed pages are reprinted.
Covers issues with PDF files, flash drive errors, and print jobs not printing.
Addresses issues with multiple-language PDF files not printing correctly.
Troubleshooting steps for PDF files with embedded fonts not printing.
Guides for resolving errors when reading a flash drive.
Troubleshooting steps for when print jobs are not sent to the printer.
Troubleshooting for held jobs that are not printing or are not listed.
Troubleshooting steps when print jobs take longer than usual to complete.
Troubleshooting steps when jobs print from incorrect trays or on wrong paper.
Troubleshooting steps when incorrect characters appear on prints.
Troubleshooting for issues with tray linking functionality.
Troubleshooting steps when large jobs are not collated correctly.
Troubleshooting steps for unexpected page breaks during printing.
Covers issues with jagged characters, clipped pages, shadow images, gray backgrounds, and voids.
Troubleshooting steps for print quality issues with jagged or uneven character edges.
Troubleshooting steps for pages or images that appear clipped.
Troubleshooting steps for when shadow images appear on prints.
Troubleshooting steps for prints that have a gray background.
Troubleshooting steps for prints that have incorrect margins.
Troubleshooting steps for paper that is still curled after loading and printing.
Troubleshooting steps for various print irregularities like streaked lines and texture issues.
Troubleshooting steps for repeating defects that appear on prints.
Troubleshooting steps for prints that are too dark.
Troubleshooting steps for prints that are too light.
Troubleshooting steps for when the printer is printing blank pages.
Troubleshooting steps for prints that appear skewed.
Troubleshooting steps for when the printer prints solid black pages.
Troubleshooting steps for poor print quality when using transparencies.
Troubleshooting steps for streaked horizontal lines on prints.
Troubleshooting steps for streaked vertical lines on prints.
Troubleshooting steps for horizontal voids appearing on prints.
Troubleshooting steps for vertical voids appearing on prints.
Troubleshooting steps for toner specks appearing on prints.
Troubleshooting steps for toner fog or background shading on prints.
Troubleshooting steps when toner rubs off prints.
Troubleshooting steps for uneven print density.
Troubleshooting steps specific to touch-screen models for application errors.
Steps to check the system log for application error details.
Troubleshooting steps for when the Embedded Web Server is inaccessible.
Information required before contacting customer support and support contact details.
Details product name, machine type, and model numbers.
Provides publication details, warranty disclaimers, and copyright information.
Licensing terms for U.S. Government end users of the software and documentation.
Lists registered trademarks and registered service marks of Lexmark and other companies.
FCC compliance information for Class B digital devices, including interference guidelines.
Information on accessing licensing notices from the installation software CD.
Provides noise level measurements in accordance with ISO 7779 standards.
Explains the WEEE logo and encourages recycling of electronic products.
Compliance statement regarding hazardous substances in India E-Waste rules.
Advises against disposing of the printer as household waste and recommends consulting local authorities.
Identifies static-sensitive parts and advises on proper handling to prevent damage.
Indicates ENERGY STAR certification for energy efficiency.
Specifies ambient operating, shipping, and storage temperatures and humidity.
Certifies the printer as a Class I laser product conforming to safety standards.
Indicates where a laser notice label may be affixed to the printer.
Documents power consumption characteristics of the product in various modes.
Details power consumption (Watts) for Printing, Copy, Scan, Ready, Sleep, Hibernate, and Off modes.
Describes the energy-saving Sleep Mode and its timeout settings.
Describes the ultra-low power Hibernate mode and methods to enter it.
Explains how to completely stop power consumption by disconnecting the cord.
Explains how to calculate total product energy usage by multiplying power by time.
Class B digital apparatus compliance statement for Canadian Interference-Causing Equipment Standard ICES-003.
French version of the Industry Canada compliance statement for Class B digital apparatus.
Product conformity with EC directives for EMC, safety, and hazardous substances.
Provides warranty terms for Lexmark laser, LED, and multifunction laser printers.
States Lexmark's warranty for manufacturing, parts, and workmanship.
Details warranty service procedures, including proof of purchase and replacement terms.
Excludes warranty coverage for failures caused by modification, misuse, or environment.
Limits Lexmark's liability for damages, excluding lost profits and consequential damages.
States consumer rights that may vary by state, regarding implied warranties and damages.
To Next Page
