2 From the print options pop‑up menus, adjust the settings,
if necessary.
Note: To print on a specific paper type, adjust the
paper type setting to match the paper loaded, or select
the appropriate tray or feeder.
3 Click Print.
Canceling a print job from the computer
For Windows users
1 Open the printers folder:
a Click , or click Start and then click Run.
b In the Start Search or Run dialog, type control printers.
c Press Enter, or click OK.
2 Double‑click the printer icon.
3 Select the print job you want to cancel.
4 Click Delete.
For Macintosh users
In Mac OS X version 10.5 or later:
1 From the Apple Menu, navigate to either of the following:
• System Preferences > Print & Fax > select a printer > Open Print
Queue
• System Preferences > Print & Scan > select a printer > Open
Print Queue
2 From the printer window, select the print job you want to cancel,
and then click Delete.
Loading paper and specialty
media
Loading paper and specialty media
Loading the 250‑ or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1 Pull out the tray.
Notes:
• When loading folio‑, legal‑, or oficio‑size paper, lift the tray
slightly and pull it out.
• Avoid removing trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
2 Squeeze and slide the width guide to the correct position for the
size of the paper being loaded until it clicks into place.
2
1
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
11
To Next Page
Loading...
