Lexmark MS810 - Loading the Multipurpose Feeder

6 From the printer control panel, set the size and type in the Paper
menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams
and print quality problems.
Loading the multipurpose feeder
1 Pull down the multipurpose feeder door.
Note: Do not load or close the multipurpose feeder while a job is
printing.
B
5
E
X
E
C
A
4
A
5
LT
R
2 Pull the multipurpose feeder extender.
B
5
E
X
E
C
A
4
A
5
LT
R
Note: Guide the extender gently so that the multipurpose feeder
is fully extended and open.
3 Slide the width guide to the correct position for the size of the paper
being loaded.
B5
E
X
E
C
A
4
A
5
LTR
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
17