10 Install the standard bin cover.
11 Turn on the printer.
Replacing the hot roll fuser wiper
Note: The hot roll fuser wiper is available only in some printer models.
1 Turn o the printer.
2 Remove the standard bin cover.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Warning—Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal
frame of the printer before accessing or touching interior areas of the printer.
Maintaining the printer 113
To Next Page
Loading...
