EasyManua.ls Logo

Lexmark MX-B557P - Network and Ports; Network Overview and Wireless Setup

Lexmark MX-B557P
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu item Description
Separator Sheet Source
Tray [x] (1*)
Multipurpose Feeder
Specify the paper source for the separator sheet.
Blank Pages
Do Not Print*
Print
Print blank pages in a print job.
Note: An asterisk (*) next to a value indicates the factory default setting.
Network/Ports
Network Overview
Menu item Description
Active Adapter
Auto*
Standard Network
Wireless
Specify how a network is connected.
Network Status Show the printer network status and connectivity settings.
Display Network Status on
Printer
O
On*
Show the network status on the display.
Speed, Duplex Show the speed of the currently active network card.
IPv4 Show the IPv4 address.
All IPv6 Addresses Show all IPv6 addresses.
Reset Print Server
Start
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Network Job Timeout
Disabled
Enabled*
Set the time before the printer cancels a network print job.
Note: Network Job Timeout Time appears only in some printer models.
Network Job Timeout Time
10–255 seconds (90*)
Banner Page
O*
On
Print a banner page.
Enable Network Connections
Enable*
Disable
Enable or disable all network connections.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 68

Table of Contents

Related product manuals