Installing the output expander or high‑capacity output expander
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Unpack the output expander or high‑capacity output expander.
4 Attach the guide bar to the output expander or high‑capacity output expander.
Note: When installing multiple options, attach the guide bar only to the option that is connected directly
to the printer.
a Position the output expander on its side.
Upgrading and migrating 192
To Next Page
Loading...
