EasyManua.ls Logo

Lexmark MX410 Series - Finishing Menu

Lexmark MX410 Series
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use To
Print All Order
Alphabetical
Oldest First
Newest First
Specify the order in which held and confidential jobs are printed
when Print All is selected.
Note: Alphabetical is the factory default setting. Print jobs always
appear in alphabetical order on the printer control panel.
Finishing menu
Use To
Sides (Duplex)
1 sided
2 sided
Specify whether twosided printing is set as the default for all print jobs.
Notes:
1 sided is the factory default setting.
You can set twosided printing from the printer software.
Duplex Binding
Long Edge
Short Edge
Define binding for two-sided pages in relation to page orientation.
Note: Long Edge is the factory default setting.
Copies
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Blank Pages
Do Not Print
Print
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Specify whether to insert blank separator sheets.
Notes:
Off is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to (1,2,3) (1,2,3). If Collate is set to (1,1,1) (2,2,2), then a blank
page is inserted between each set of printed pages, such as after all page 1's
and after all page 2's.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank sheet between each page of a print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Separator Source
Tray [x]
Multipurpose Feeder
Specify the paper source for separator sheets.
Notes:
Tray 1 (standard tray) is the factory default setting.
From the Paper menu, set Configure MP to “Cassette” for Multipurpose
Feeder to appear as a menu setting.
Understanding the printer menus 188

Table of Contents

Related product manuals