Lexmark MX410 Series - Horizontal Voids Appear on Prints

Action Yes No
Step 3
Reinstall the toner cartridge.
a Remove the cartridge.
b Install the cartridge.
c Resend the print job.
Did the background disappear from the prints?
The problem is solved. Go to step 4.
Step 4
Check if off-white background is selected.
a Depending on your operating system, set off-white background from
Print Properties or the Print dialog.
b Resend the print job.
Did the background disappear from the prints?
The problem is solved. Contact
customer
support.
Horizontal voids appear on prints
Leading edge
Trailing edge
Action Yes No
Step 1
a Make sure your software program is using a correct fill pattern.
b Resend the print job.
Do horizontal voids appear on prints?
Go to step 2. The problem is solved.
Step 2
a Load the specified tray or feeder with a recommended type of paper.
b Resend the print job.
Do horizontal voids appear on prints?
Go to step 3. The problem is solved.
Troubleshooting 265