Lexmark MX410 Series - Supported Paper Sizes, Types, and Weights

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found
at the Environmental Sustainability link.
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
• For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most
label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity
between 40 and 60 percent.
• Store paper in cartons, on a pallet or shelf, rather than on the floor.
• Store individual packages on a flat surface.
• Do not store anything on top of individual paper packages.
• Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper
help keep the paper clean, dry, and flat.
Supported paper sizes, types, and weights
Supported paper sizes
Paper size and dimension Standard
250‑sheet tray
Optional 250‑ or
550‑sheet tray
Multipurpose
feeder
ADF Scanner
glass
Duplex
printing
Business card X X X X
X
3 x 5 in. X X
1
X X
4 x 6 in. X X
1
X X
A4
210 x 297 mm
(8.27 x 11.7 in.)
A5
148 x 210 mm
(5.83 x 8.27 in.)
X
A6
105 x 148 mm
(4.13 x 5.83 in.)
X X
1
Paper is supported only if the paper size setting is set to Universal.
2
Paper is supported only in MX510de, MX511de, and MX511dhe printer models.
3
Paper is supported in two‑sided (duplex) printing only if the width is at least 210 mm (8.27 in.) and the length is at least
279.4 mm (11 in.). The smallest supported Universal paper size is supported only in the multipurpose feeder.
4
Paper is supported in MX410de printer model only if the width is at least 215.9 mm (8.5 in.) and the length is at least
296.9 mm (11.7 in.).
5
Paper is supported in MX410de printer model only if the length is at least 296.9 mm (11.7 in.).
Paper and specialty media guide 68