What to do when Lexmark MX717 All in One Printer displays 'Cartridge very low'?
If your Lexmark All in One Printer displays 'Cartridge very low', it means you may need to replace the toner cartridge soon. Touch 'Continue' on the printer control panel to clear the message and continue printing, if necessary.
What to do if Lexmark All in One Printer shows 'Defective flash detected'?
If your Lexmark All in One Printer detects a defective flash, try the following: * Replace the defective flash memory card. * From the printer control panel, touch 'Continue' to ignore the message and continue printing. * Cancel the current print job.
How to fix 'Fax memory full' error on Lexmark MX717 All in One Printer?
If your Lexmark All in One Printer's fax memory is full, follow these steps: 1. From the control panel, touch 'Continue' to clear the message and cancel the fax job. 2. Reduce the fax resolution or the number of pages. 3. Send the fax job again.
How to resolve 'Load multipurpose feeder' message on Lexmark All in One Printer?
If your Lexmark All in One Printer prompts you to load the multipurpose feeder, try the following: * Load the feeder with the correct size and type of paper. * From the control panel, touch 'Prompt each page, paper loaded' or 'Do not prompt, paper loaded' to clear the message and continue printing. * From the control panel, touch 'Automatically select paper' to use the paper loaded in the tray. * Cancel the print job.
How to resolve 'Install Tray [x]' message on Lexmark MX717?
If your Lexmark All in One Printer displays 'Install Tray [x]', try the following: * Install the specified tray: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Install the specified tray. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on. * Cancel the print job. * Reset the active bin.
What to do if Lexmark MX717 All in One Printer says 'Too many trays attached'?
If your Lexmark All in One Printer displays 'Too many trays attached', follow these steps: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra trays. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.
What to do if Lexmark MX717 All in One Printer says 'Insufficient memory to collate job'?
If your Lexmark All in One Printer displays 'Insufficient memory to collate job', try the following: * From the printer control panel, touch 'Continue' to print the part of the job already stored and begin collating the rest of the print job. * Cancel the current print job.
How to fix 'Reinstall missing or unresponsive cartridge' error on Lexmark All in One Printer?
If your Lexmark All in One Printer displays 'Reinstall missing or unresponsive cartridge', follow these steps: * Check to see if the toner cartridge is missing. If it is, install the toner cartridge. * If the toner cartridge is already installed, remove it and then reinstall it. If the message continues to appear after reinstalling, the cartridge may be defective or a non-genuine Lexmark supply and should be replaced.
What does 'Imaging unit low' mean on Lexmark MX717?
If your Lexmark All in One Printer displays 'Imaging unit low', it indicates that you may need to order a replacement imaging unit. You can select 'Continue' on the printer control panel to clear the message and proceed with printing.
What to do if Lexmark MX717 says 'Cartridge nearly low'?
If your Lexmark All in One Printer shows 'Cartridge nearly low', you can touch 'Continue' on the printer control panel to clear the message and continue printing, if necessary.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Speed (Color) | 50 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 1.2 GHz |
| Connectivity | USB, Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, macOS, Linux |
| Copy Speed (Color) | 50 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Scan Resolution | 600 x 600 dpi |
| Standard Paper Capacity | 650 sheets |
| Paper Capacity (Maximum) | 3, 300 pages |
| Memory (Maximum) | 2 GB |
| Copy Reduce / Enlarge Range | 25% to 400% |
| Fax Transmission Speed | Approx. 3 seconds per page |
| Scan Technology | CIS |
| Mobile Printing | AirPrint, Google Cloud Print |
To Next Page
