What to do if Lexmark All in One Printer says 'Disk near full'?
If your Lexmark All in One Printer displays 'Disk near full. Securely clearing disk space.', try the following: * Touch 'Continue' to clear the message and continue printing. * Delete fonts, macros, and other data stored on the printer hard disk. * Install a hard disk with higher capacity.
What to do if Lexmark MX717 All in One Printer shows 'Memory full'?
If your Lexmark All in One Printer displays a 'Memory full' message, you can try the following: * Touch 'Cancel job' on the printer control panel to clear the message. * Install additional printer memory.
What to do if Lexmark MX717 says 'Cartridge nearly low'?
If your Lexmark All in One Printer shows 'Cartridge nearly low', you can touch 'Continue' on the printer control panel to clear the message and continue printing, if necessary.
What does 'Imaging unit low' mean on Lexmark MX717?
If your Lexmark All in One Printer displays 'Imaging unit low', it indicates that you may need to order a replacement imaging unit. You can select 'Continue' on the printer control panel to clear the message and proceed with printing.
How to fix 'Reinstall missing or unresponsive cartridge' error on Lexmark All in One Printer?
If your Lexmark All in One Printer displays 'Reinstall missing or unresponsive cartridge', follow these steps: * Check to see if the toner cartridge is missing. If it is, install the toner cartridge. * If the toner cartridge is already installed, remove it and then reinstall it. If the message continues to appear after reinstalling, the cartridge may be defective or a non-genuine Lexmark supply and should be replaced.
What to do if Lexmark MX717 All in One Printer says 'Insufficient memory to collate job'?
If your Lexmark All in One Printer displays 'Insufficient memory to collate job', try the following: * From the printer control panel, touch 'Continue' to print the part of the job already stored and begin collating the rest of the print job. * Cancel the current print job.
What does 'Imaging unit nearly low' mean on Lexmark MX717 All in One Printer?
If your Lexmark All in One Printer displays 'Imaging unit nearly low', you can touch 'Continue' on the printer control panel to clear the message and continue printing if necessary.
How to resolve 'Disk full' message on Lexmark All in One Printer?
If your Lexmark All in One Printer displays 'Disk full', you can try the following: * From the printer control panel, touch 'Continue' to clear the message and continue processing. * Delete fonts, macros, and other data stored in the printer hard disk. * Install a printer hard disk with larger capacity.
What to do if Lexmark MX717 says 'Insufficient memory to support Resource Save feature'?
If your Lexmark All in One Printer displays 'Insufficient memory to support Resource Save feature', install additional printer memory or touch 'Continue' to disable Resource Save, clear the message, and continue printing.
How to fix 'Fax memory full' error on Lexmark MX717 All in One Printer?
If your Lexmark All in One Printer's fax memory is full, follow these steps: 1. From the control panel, touch 'Continue' to clear the message and cancel the fax job. 2. Reduce the fax resolution or the number of pages. 3. Send the fax job again.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Speed (Color) | 50 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 1.2 GHz |
| Connectivity | USB, Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, macOS, Linux |
| Copy Speed (Color) | 50 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Scan Resolution | 600 x 600 dpi |
| Standard Paper Capacity | 650 sheets |
| Paper Capacity (Maximum) | 3, 300 pages |
| Memory (Maximum) | 2 GB |
| Copy Reduce / Enlarge Range | 25% to 400% |
| Fax Transmission Speed | Approx. 3 seconds per page |
| Scan Technology | CIS |
| Mobile Printing | AirPrint, Google Cloud Print |
To Next Page
