Use To
Punch
Off
On
Specify whether prints are punched.
Note: Off is the factory default setting.
Staple
Off
1 staple
Specify whether prints are stapled.
Note: Off is the factory default setting.
Offset Stacker
None
Between Copies
Between Jobs
Offset pages at certain instances.
Notes:
• None is the factory default setting.
• This menu item appears only when an offset stacker or a staple finisher is
installed.
Fax Log Settings
Use To
Transmission Log
Print log
Do not print log
Print only for error
Enable printing of a transmission log after each fax job.
Note: Print log is the factory default setting.
Receive Error Log
Print Never
Print on Error
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Auto Print Logs
On
Off
Enable automatic printing of fax logs.
Notes:
• On is the factory default setting.
• Logs print after every 200 fax jobs.
Log Paper Source
Tray [x]
Manual Feeder
Specify the source of the paper used for printing logs.
Note: Tray 1 is the factory default setting.
Logs Display
Remote Station Name
Dialed Number
Specify whether printed logs display the dialed number or the station name or fax
name returned.
Note: Remote Station Name is the factory default setting.
Enable Job Log
On
Off
Enable access to the Fax Job log.
Note: On is the factory default setting.
Enable Call Log
On
Off
Enable access to the Fax Call log.
Note: On is the factory default setting.
Log Output Bin
Standard Bin
Bin [x]
Specify the bin where fax logs are printed.
Note: Standard Bin is the factory default setting.
Understanding the printer menus 212
To Next Page
Loading...
