Lexmark MX810 Series - Page 52

4
5
6
7
3
1
2
Use the To
1 EXT port Connect additional devices (telephone or answering machine) to the printer and
the telephone line. Use this port if you do not have a dedicated fax line for the
printer and if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
2 LINE port Connect the printer to an active telephone line through a standard wall jack
(RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to access
the telephone line to send and receive faxes.
3 Printer power cord socket Connect the printer to a properly grounded electrical outlet.
4 USB printer port Connect the printer to a computer.
5 Ethernet port Connect the printer to a network.
6 Internal Solutions Port (ISP) or
printer hard disk slot
Note: If the printer has support
for wireless connection, then the
wireless antenna is attached
here.
Attach an ISP or a printer hard disk.
7 USB port Attach an optional wireless network adapter.
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the area
shown while actively printing. Loss of data or a malfunction can occur.
Additional printer setup 52