• There are different ways of loading letterhead depending on whether an optional staple finisher is installed or
not.
Without an optional staple finisher With an optional staple finisher
One‑sided printing One‑sided printing
ABC
Two‑sided printing
ABC
Two‑sided printing
• If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge
of the paper are on the right side of the tray.
One‑sided printing Two‑sided printing
ABC
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
Loading paper and specialty media 85
To Next Page