•
Scanner glass
•
Scanner glass pad
3
Open door E.
4
Using a damp, soft, lint-free cloth, wipe the following areas:
•
ADF glass pad in door E
•
ADF glass in door E
5
Close door E, and then close the scanner cover.
Loading the 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note: To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the guides to match the size of the paper that you are
loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
9
To Next Page
Loading...
