6
Prepare the printer
Step 3: Prepare the printer
Positioning the printer Once you have selected a location and
positioned an optional drawer (if you
have one), you are ready to position the
printer.
Note: If you have optional memory to
install, leave clearance on the left side of
the printer.
Lift the printer by the recessed
handholds on both sides, and place it on
the table or optional drawer.
To position the printer on an optional
drawer:
1 Align the tabs, slots, and
connector on the drawer with the
underside of the printer.
2 Lower the printer into place. Make
sure it is seated securely on the
drawer.
Slot
Tab
Connector
Handhold
To Next Page
Loading...
