3
Unpack the printer
Step 1: Unpack the printer
Warning! Allow at least 7.62 cm (3 in.)
clearance on the right side of the printer
for the cooling fan to function properly.
Select a well ventilated location for your
printer that provides room for the trays,
cover, and doors. Choose a firm, level
surface away from direct airflow and
temperature extremes.
Remove all items from the box. Make
sure you have the following items:
• Printer with one 250-sheet tray
• Power cord
• Print cartridge (shipped inside
printer, wrapped in packaging)
• Setup Guide with a Publications
CD and Quick Reference card
• Drivers CD
• Operator panel overlay
(non-English only)
If any items are missing or damaged,
refer to the Publications CD for the
designated Lexmark support phone
number for your country.
Save the carton and packing material in
case you need to repack the printer.
Setup Guide with Publications CD
and Quick Reference card
Power cord
Drivers CD
Operator panel overlay
(non-English only)
Handhold
250-sheet tray
What do I do next?
Task Go to page …
Position the optional drawer 4
Prepare the printer 6
To Next Page
Loading...
