13
Install memory cards
Installing a
memory card
Follow the instructions in this section to
install either a printer memory card or a
flash memory card. Memory cards must
have 100-pin connectors.
Warning! Memory cards are easily
damaged by static electricity. Touch
something metal on the printer before
you touch a card.
1 Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
2 Push open the latches on both
sides of the memory connector
you want to use.
3 Align the notches on the card with
the notches on the connector.
4 Push the memory card firmly into
the connector until the latches on
either end of the connector snap
into place.
It may require some force to fully
seat the card.
5 Make sure each latch fits over the
notch on the end of the card.
Reattaching the shield After installing your memory cards, you
must reattach the shield.
Latch
Notch
Notch
To Next Page
Loading...
