Lexmark T420 - Loading the Trays

16
Load print media
Loading the trays Follow these instructions to load the
standard tray and any optional tray.
Note: If you load any print media other
than plain letter or A4 paper in tray 1,
make sure you change the Paper Type
and Paper Size settings for that tray from
the driver. Refer to the Publications CD
for more information.
1 Remove the tray.
Note: The length guide on an optional
500-sheet tray is shaped differently than
the length guide on the other trays, but
the function is the same.
2 If you are loading an optional 500-
sheet tray, open the cover.
Optional 250-sheet tray
Cover
Length
guide
Optional 500-sheet tray