– Only the multipurpose feeder guide can support the minimum size.
Note: Do not add or remove paper or specialty media when the printer is printing from the multipurpose feeder or
when the printer control panel indicator light is blinking. Doing so may cause a jam.
1 Pull down the multipurpose feeder door.
2 Gently pull the extension until it is fully extended.
3 Adjust the width guides to the correct positions for the paper size being loaded.
4 Flex the sheets of paper or specialty media back and forth to loosen them, and then fan them. Do not fold or crease
them. Straighten the edges on a level surface.
Loading paper and specialty media 51
To Next Page
Loading...
