Standard bin
• The paper capacity is 300 sheets.
• Finishing options are not supported in this bin.
• Envelopes are routed here.
Finisher Bin 1
• The paper capacity is 500 sheets of A4/Letter and 300 sheets of A3/Ledger.
• Envelopes, A5, A6, and Statement are not supported in this bin.
• Finishing options are not supported in this bin.
Finisher Bin 2
The paper capacity is 3,000 sheets when the standard finisher is installed.
Finisher Bin 2 finishing features
Size
Two‑hole punch
*
Three‑ or
Four‑hole punch
Offset Single staple Dual staple
A3
A4
Note: Supported
only if feeding
orientation is long
edge.
Note: Supported
only if feeding
orientation is long
edge.
A5XXXXX
Executive
Folio X
JIS B4
JIS B5
Legal X
Letter
Note: Supported
only if feeding
orientation is long
edge.
Note: Supported
only if feeding
orientation is long
edge.
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for
a 4‑hole punch.
Punch—Two‑, three‑, or four‑hole punch settings
Single staple—One staple
Dual staple—Two staples
Printing 75
To Next Page
Loading...
