17
Maintenance
Replacing the print cartridges
The Lexmark X1100 Series has been designed to print using the following
cartridges.
Note: You can print using only the color cartridge, or with both
a color cartridge and a black cartridge.
For information about ordering supplies, see page 8.
Before you install new or replacement print cartridges, remove the used
cartridges.
1 Make sure the All-In-One is on.
2 Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position
unless the All-In-One is busy.
3 Squeeze the tabs on the cartridge lids, and then lift the lids.
4 Remove the old cartridges. Store them in an air-tight container or
dispose of them.
5 If you are installing new cartridges, remove the stickers and
transparent tape from the bottom of the cartridges.
Warning: Do not touch the gold contact area on the cartridges.
Item: Part number:
Standard yield black cartridge 16
Standard yield color cartridge 26
Moderate use black cartridge 17
Moderate use color cartridge 27
To Next Page
Loading...
