25
Copy button on the control panel does not work
• Make sure the computer is on. The computer must be on in order
for the All-In-One to work.
• Make sure you properly installed the software. For help, refer to the
setup documentation. The software must be installed for the copier
to work.
Fax function does not work
• Make sure the computer and the All-In-One are on.
• Make sure the computer is connected to a phone line. A phone
connection is required for faxing to function.
• The memory may be full. Wait until the faxes in memory have been
sent, and then send the current fax again.
To Next Page
Loading...
