Lexmark X1100 Series - Learning About the All-In-One; Setting Up the All-In-One

1
Learning about the All-In-One
Setting up the All-In-One
If you have not already done so, follow the steps on the Setup Sheet to
complete the hardware and software installation. If problems occur during
the setup process, see “Setup troubleshooting” on page 20.
Understanding the parts of the All-In-One
Scanner unit
Lift to access the print
cartridges.
Top cover
Lift to place an item on
the scanner glass.
Paper exit tray
Extend to hold paper as
it exits the All-In-One.
Paper support
Lift to load paper into
the All-In-One.
Control panel
Use the buttons to operate the
All-In-One (see page 2 for details
about each of the buttons).
Paper guide
Slide next to paper to
ensure proper feeding.