Getting the MFP ready to fax
15
3 Connect the other en of the telephone cord into an active telephone wall jack.
Note: For more information on connecting the MFP to telecommunications equipment,
see the additional setup instructions that came with the MFP. Setup steps may vary
depending on your country or region.
Connecting to a telephone
Connect a telephone to the MFP to use the fax line as a normal telephone line. Then set up the
printer wherever your telephone is located to make copies or send and receive faxes without using a
computer.
1 Make sure you have the following:
• A telephone
• Two telephone cords
• A telephone wall jack
2 Connect one telephone cord to the LINE port of the MFP, and then plug it into an active
telephone wall jack.
To Next Page
Loading...
