Loading paper in the manual feeder
32
Loading paper in the manual feeder
Use the manual feeder to print transparencies, labels, envelopes, or card stock. You may also use
the manual feeder to make short runs of paper types or sizes that are not currently loaded in the
paper tray.
For information on acceptable print media to use in the manual feeder, see Loading various paper
types on page 33.
1 Make sure:
• You use paper designed for laser printers.
• The paper is not used or damaged.
• If you are using specialty paper, you follow the instructions that came with it.
• You do not force paper into the MFP.
• Set the correct paper type and size in the control panel, or using the computer. For
more information, see Setting the paper type and size.
2 Place a single sheet of paper face-up with the leading edge first into the center of the manual
feeder, and adjust the paper guides to the paper width.
The MFP automatically engages the print media.
To Next Page
Loading...
