Lexmark X463 - Changing IPDS Settings Using the Operator Panel; Accessing the IPDS MENU; Example: Selecting a New Value as a Setting

2.2 Changing IPDS Settings Using the Operator Panel
2.2.1 Accessing the IPDS MENU
Access the IPDS emulation options and settings from the IPDS MENU on the printer. To reach the
menu:
1. From a Ready status, press the Menu button on the operator panel. This opens the menu index
in the operator panel’s screen.
2. Use the navigation buttons
or to scroll through the main menus displayed on the
screen.
3. Each time you press a navigation button
or , the 9 on the screen moves to indicate the
choice that will be active when you select it.
4. When
9 is displayed next to the Option Card Menu, press the Select button .
5. When
9 is displayed next to IPDS MENU, press .
The same method is used to scroll through lists of menus and options. As you move through the menus,
the top line in the screen shows the name of the group (menu or option) to which the displayed items
(options or settings) belong.
When you select an option, you will either scroll through the list of values presented, as shown in section
2.2.2, on page 11, or enter a number through one of the methods shown in section 2.2.3 on page 13.
User-selected default settings remain in effect until you save new settings or restore the factory defaults.
Concerning activation, see section 2.2.4 on page 14.
2.2.2 Example: Selecting a New Value as a Setting
1. Navigate to the IPDS MENU as explained in section 2.2.1 on page 11.
2. Press
or to scroll to the desired menu. The names of menus are shown in all capital letters.
Press .
In the following example, you select EMULATION, which happens to be the first on the list.
11