Lexmark X463 - Saved Option Changes Become Active on New Session; Printing the Menu Settings Page (Printers)

2.2.4 Saved Option Changes Become Active on New Session
All saved settings will become active on the next IPDS host session.
If the printer IPDS Timeout is NOT set to “Host Controlled” (Option Card Menu > IPDS MENU >
EMULATION > IPDS Timeout = “Host Controlled”), power the printer OFF and ON to activate the
new settings. For more information on IPDS Timeout, see page 27.
2.2.5 Printing the Menu Settings Page (printers)
1.
. Make sure the printer is ON. 1
2.
2. Press on the operator panel.
3.
. Press
 until the 9appears next to Reports, and then press . 3
Menus
Paper Menu
9Reports
Settings
4. Press
 until the 9appears next to Menu Settings Page, and then press .
Reports
9 Menu Settings Page
Device Statistics
Network Setup Page
5. The message Printing Menu Settings Page is displayed.
6. The printer returns to Ready state after the list of current active settings prints.
14