X’01’
- - - - -
X’02’
X’03’
X’04’
X’05’
X’06’
X’07’
X’08’
are generated by the printer. Using any characters other than
those prescribed for any part of the bar code will result in a
NACK.
Standard Customer Barcode (format code = 11).
An 8-digit number representing the Sorting Code.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Modifiers X’02’ to and including X’07’ are built up in two parts:
the Sorting Code and Customer Information. The Customer
Information follows the Sorting Code. The Sorting Code is
always 8 digits (valid characters are 0-9).
Customer Barcode 2 using the N encoding table (format code =
59). Customer Information is represented by up to 8 digits (0-9).
Customer Barcode 2 using the C encoding table (format code =
59). Customer Information is represented by up to 5 characters
(A-Z, a-z, 0-9, space, #).
Customer Barcode 2 using proprietary encoding (format code =
59). Customer Information is represented by up to 16 digits
(numeric 0-3), each of which specifies one of the four types of
bar.
Customer Barcode 3 using the N encoding table (format code =
62). Customer Information is represented by up to 15 digits (0-
9).
Customer Barcode 3 using the C encoding table (format code =
62). Customer Information is represented by up to 10 characters
(A-Z, a-z, 0-9, space, #).
Customer Barcode 3 using proprietary encoding (format code =
62). Customer Information is represented by up to 31 digits
(numeric 0-3), each of which specifies one of the four types of
bar.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reply Paid Barcode (format code = 45). 8-digits (0-9) number
representing the Sorting Code.
X’21’
Code 93
X’00’
The Standard Code 93 character set and Extended Code 93
character set are supported.
Generate check digit and print it with the bar code.
X’22’
USPS Four-State
X’00’
Also referred to as OneCode
SOLUTION
bar code.
No Routing ZIP Code is used to present the USPS Four-State
bar code symbol. 20 numeric digits must be used as input data