Lexmark X548 - Maxicode Special Function Parameter Support; PDF417 Special Function Parameter Support; QR Code (Quick Response Code)

113
D.2 MaxiCode Special Function Parameter Support
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference”.
Offset
Name
Supported Values
Byte 5 Bit 0
EBCDIC
B’0’, B’1’
Byte 5 Bit 1
Escape Sequence Handling
B’0’, B’1’
Byte 6
Symbol Mode
X’02’ – X’05’
Byte 7
Sequence Indicator
X’00’ – X’08’
Byte 8
Total Symbols
X’00’, X’02’ – X’08’
Byte 9 Bit 0
Zipper
B’0’, B’1’
D.3 PDF417 Special Function Parameter Support
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference”.
Offset
Name
Supported Values
Byte 5 Bit 0
EBCDIC
B’0’, B’1’
Byte 5 Bit 1
Escape Sequence Handling
B’0’, B’1’
Byte 6
Data Symbols
X’01’ – X’1E’
Byte 7
Rows
X’03’ – X’5A’, X’FF’
Byte 8
Security
X’00’ – X’08’
Byte 9 – 10
Macro Length
X’0000’ – X’7FED’
Byte 11
Macro Data
Values as defined in BCOCA Reference
Version 4.
D.4 QR Code (Quick Response Code)
These values are found in the Bar Code Symbol Data. A description of the supported values may be found
in the ”Bar Code Object Content Architecture (BCOCA) Reference”.
Offset
Name
Supported Values
Byte 5 Bit 0
EBCDIC
B’0’, B’1’
Byte 5 Bit 1
Escape Sequence Handling
B’0’, B’1’
Byte 6
EBCDIC code page
X’00’ – X’03’
Byte 7
Version
X’00, X’01 – X’28’
Byte 8
Error correction level
X’00’ – X’03’
Byte 9
Sequence indicator
X’00’ – X’10’
Byte 10
Total symbols
X’00’ or X’02’ – X’10’
Byte 11
Parity Data
X’00’ – X’FF’
Byte 12 Bit 0
UCC/EAN FNC1
B’0’, B’1’ see below
Byte 12 Bit 1
Industry FNC1
B’0’, B’1’ see below
Byte 13
Application indicator
Dependent on Byte 12 (special-function flags).
See below
Byte 12 Bit 0 and 1, special-function flags
The special-function flags in Byte 12 specify special functions that can be used with a QR Code symbol.
Bits 0 and 1 are alternate data type identifiers. Exception condition EC-0F11 exists if an incompatible
combination of the two bits in Byte 12 is specified.