Lexmark X548 - Page 57

57
5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples)
Double Dual staple (IPDS Edge stitch with four staples) may be controlled by the Edge stitch parameters
in the Printer File. Four staples are placed on the long edge of the paper. Double Dual staple is only
supported on Letter and A4 when the paper is loaded for Long Edge Fed (LEF) printing.
Parameters in the printer file
Edge Stitch
Reference edge...........*LEFT or *DEVD
Reference edge offset....*DEVD
Number of staples........4
Staple offsets...........*DEVD
Reference edge: *LEFT or *DEVD – NACKs may be generated for other parameters.
Reference edge offset: *DEVD – All other values are ignored.
Number of staples – 4
Note: If the number of staples is 2, Edge stitch with two staples will be performed.
Staple Offsets: *DEVD – All other values are ignored.
Drawing of positions
ABC
0º
180º
ABC
90º
ABC
270º