Lexmark X656DE - Page 111

Diagnostic information 2-77
7462
Go Back
Previous
Next
903.xx Paperport link driver
error
Code detected unusual event
or timing.
1. POR the machine and print
a simple test page to
determine if the problem is
system software related, or
if the customer is sending a
corrupted print job.
2. Check all connections on
the system card assembly.
3. Replace the system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
904.xx Interface violation by
RIP
Code detected unusual event
or timing.
1. POR the machine and print
a simple test page to
determine if the problem is
system software related, or
if the customer is sending a
corrupted print job.
2. Check all connections on
the system card assembly.
3. Replace the system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
905.xx Interface violation by
paperport device
Code detected unusual event
or timing.
1. POR the machine and print
a simple test page to
determine if the problem is
system software related, or
if the customer is sending a
corrupted print job.
2. Check all connections on
the system card assembly.
3. Replace the system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
906.xx RIP interface driver
error
Code detected unusual event
or timing.
1. POR the machine and print
a simple test page to
determine if the problem is
system software related, or
if the customer is sending a
corrupted print job.
2. Check all connections on
the system card assembly.
3. Replace the system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
Error
code or
message
Error contents Description/Action Possible repair actions